Decorative panels for exterior walls of the house

Decorative panels for exterior walls of the house

Decorative panels for exterior walls of the house

Look very impressive at home, finished with natural materials such as stone and wood. However, these are quite expensive solutions. A cheaper and equally impressive solution are decorative panels for exterior walls of a tree-like house or plates that are made of expanded polystyrene for facade cladding. What are the decorative panels for exterior decoration, what are their advantages - we consider below.

Large facade panels are used not only for office buildings and skyscrapers. This is a good idea for the original wall decoration of a modern house. Look at the advantages of foam polystyrene and vinyl panels, fiber cement boards, HPL laminate, metal panels. 

Decorative panels for the exterior walls of the house from expanded polystyrene

These ready-made elements, covered with a special coating imitating the pattern of wood or stone, can be chosen from a wide palette of colors. You can also purchase unpainted panels or profiles and paint them yourself with appropriate colors.

Installation of facade plates is quite simple, as the elements of decoration come in various forms - straight, in the form of frames for windows and doors. The advantage of this solution is the ability to perform part of the work yourself and thus save a lot of money. There is no need here to apply additional pins, screws or bolts. For installation, appropriate frost-resistant adhesives are used, intended for the installation of facade polystyrene foam.

Decorative facade panels can be used in any system of insulation, or already on the facades prepared for thermal insulation, and even on plaster.

The principle is simple - plates or wood-like profiles of expanded polystyrene are usually mounted before the final finishing of the facade, before structural plaster or before painting. The installation may be more difficult if the plaster is not smooth, that is, it has a coarse texture, for example, traditional cement-lime plaster with a decorative texture or pattern.

The finished cladding panel for facades or polystyrene profiles after installation and finishing, do not differ in quality and appearance from the traditional wooden cladding.

Decorative panels for exterior walls of the house

A house with such a facade will look stylish and beautiful. Polystyrene boards can be easily combined with other traditional or modern facade materials, such as:

  • a rock;
  • stone facing;
  • stone-like facing;
  • brick;
  • facing clinker;
  • front vinyl plates;
  • glass;
  • with other facing materials.

This solution is suitable both for traditional homes in the style of the manor, or classic, and for modern and ultra-modern.

Simplicity of installation consists, first of all, in that the finished panels can be cut as traditional expanded polystyrene to the desired size and simply glue them onto selected fragments.

Vinyl tree-like panels

Another common solution is vinyl wood exterior panels for the house, but this solution requires precision and takes a lot of time. This is a cheaper option compared to a standard tree, but it is more expensive than polystyrene plates or profiles.

Vinyl tree-like panels

Alternatively, you can also on the facade, on plaster to draw a pattern of wood fibers, and then paint it with special resins, which give the texture and appearance of wood.This option is quite time-consuming. 

Fiber cement facade panels

Cement plaster can be replaced with cement facade plates. They are made of cement reinforced with cellulose and artificial fibers, so they are called cement fiber or fibrous cement. Some of them are autoclaved during production, or steam treated under pressure. This gives them greater hardness and strength.

Fiber cement facade panels

Facing panels are available in numerous versions. The cheapest unpainted (you can do the painting later on your own). Other options can be painted with opaque paints, varnish or translucent azure. There are also painted plates and finished with paint or varnish. There are plates, pre-coated with varnish, from which you can easily remove graffiti.

They are great for buildings with a facade facing the street. The most popular format of such plates is 1200 x 2500 mm. They can be 6, 8, 10 or 12 mm thick. Their weight is 13-15 kg / m².

Large laminated facade panels

Colorful laminated plates can also be used for the body of a garage door or part of a fence. These elements are a common theme with fragments of facades.

Large laminated facade panels

Laminated panels for exterior walls of a high-pressure home (so-called HPL laminates) have a structure somewhat similar to floor laminate, but their resistance to moisture, water and other atmospheric agents is much higher.

Plates vary in format and method of installation. Their base consists of chipboard, which is additionally hardened, therefore resistant to chipping. From above they are covered with paper with almost any pattern. However, uniform colors and patterns imitating natural wood dominate. The paper is coated with a layer of resin that protects the panel, gives it shine and provides a matte or glossy surface. Laminates can also be based on material from several dozen layers of paper impregnated with phenolic resin, pressed under pressure at high temperature.

Such laminates are thinner and lighter, but also more flexible. The core of HPL plates can also be bakelite. Bakelite and bakelite slabs, veneered with wooden veneer, are also used to finish the facades. They are resistant to damage, easily processed and give the building a pleasant appearance.

HPL laminates are available in a variety of formats, but the most common sizes are commercially available, mm:

  • 1320 x 3050,
  • 1860 x 2550,
  • 1530 x 3050,
  • 1860 x 3650,
  • 2130 x 4270.

For private houses, slabs of a smaller format are used. They are attached with screws or glue to the grid. For cutting, a saw with hardened teeth or an electric saw is necessary.

Front panels metal

More and more modern houses have such a facade or fragments of facades can be trimmed in this way. As raw materials for sheet metal of such panels, as a rule, are aluminum or zinc-titanium alloy. These materials are durable, comfortable and resistant to corrosion. Metal facades can be made of panels of various shapes.

Front panels metal

Facade panels have a special structure. They look like open boxes on one side. After laying on the facade create a system of rectangular elements with a network of deep seams.

In addition to conventional panels, options are also available from a composite material of two layers of aluminum sheet with a core of metal and plastic or minerals. From the outside, they are pre-coated with PVDF varnish. Such options have nine times better acoustic properties compared to conventional panels or sheet metal panels.

The panels can be of various sizes, and they are often made to order. The thickness of the sheet metal from which they are made is 1-3 mm.

Related news

  • Who will replace Baxter at Bafana if he moves to Kaizer Chiefs
  • Beautiful Indian Dresses Images
  • 4 early signs that your loved one has ceased to love you
  • Poliomyelitis history
  • Svetlana Khodchenkova teasing PHOTO in a bikini
  • Decorative panels for exterior walls of the house

    Decorative panels for exterior walls of the house

    Decorative panels for exterior walls of the house

    Decorative panels for exterior walls of the house

    Decorative panels for exterior walls of the house

    Decorative panels for exterior walls of the house

    Decorative panels for exterior walls of the house

    Decorative panels for exterior walls of the house

    Decorative panels for exterior walls of the house

    Decorative panels for exterior walls of the house

    Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house Decorative panels for exterior walls of the house